Jackson Immuno Research Inc.
specializing in secondary antibodies and conjugates

Product Filter

DyLight™ 405 AffiniPure Fab Fragment Goat Anti-Rabbit IgG, Fc fragment specific


Target: Rabbit
Host: Goat
Antibody Format: Fab Fragment
Specificity: IgG, Fc fragment specific
Conjugate: DyLight™ 405
Product Category: FabuLight™ - Affinity-Purified Fc Specific Fab Fragments
Clonality: Polyclonal
RRID: AB_2632467

FabuLights are suggested for labeling primary antibodies to be used in immunofluorescence or histochemical experiments. They are not recommended as a general blocking agent unless the γ or µ Fc region is to be targeted alone.

Code: 111-477-008

Unit:
0.5 mg
Price:
$185.00



Technical Info

Fab fragment antibodies are generated by papain digestion of whole IgG antibodies to remove the entire Fc portion, including the hinge region. These antibodies are monovalent, containing only a single antigen binding site. The molecular weight of Fab fragments is about 50 kDa.

Based on immunoelectrophoresis and/or ELISA, the antibody reacts with the Fc portion of rabbit IgG heavy chain but not with the Fab portion of rabbit immunoglobulins. No antibody was detected against non-immunoglobulin serum proteins. The antibody may cross-react with immunoglobulins from other species.
Physical State: Freeze-dried solid

Storage and Rehydration: Store freeze-dried solid at 2-8°C. Rehydrate with the indicated volume of dH2O and centrifuge if not clear. Prepare working dilution on day of use. Product is stable for about 6 weeks at 2-8°C as an undiluted liquid.
Extended Storage after Rehydration: Aliquot and freeze at -70°C or below. Avoid repeated freezing and thawing. Alternatively, add an equal volume of glycerol (ACS grade or better) for a final concentration of 50%, and store at -20°C as a liquid.
Expiration date: one year from date of rehydration. The expiration date may be extended if test results are acceptable for the intended use.


Purity: The antibody was purified from antisera by a combination of papain digestion and immunoaffinity chromatography using antigens coupled to agarose beads. Fc fragments and whole IgG molecules have been removed.
Buffer: 0.01M Sodium Phosphate, 0.25M NaCl, pH 7.6
Stabilizer: 15 mg/ml Bovine Serum Albumin (IgG-Free, Protease-Free)
Preservative: 0.05% Sodium Azide

Suggested Working Concentration or Dilution Range:

1:100 - 1:800 for sequential labeling applications.

To complex with primary antibody in solution, use 1:1 weight ratio of Fab:primary antibody (3:1 molar ratio). Vortex and incubate for 30 minutes at room temperature prior to use. Titrate complex to optimal dilution for assay.

Dilution factors are presented in the form of a range because the optimal dilution is a function of many factors, such as antigen density, permeability, etc. The actual dilution used must be determined empirically.

DyLight™ 405

Amax: 400 Emax: 421nm

DyLight 405-conjugated secondary antibodies are excited maximally at about 400 nm and fluoresce with a peak at about 421 nm. They are very bright and photostable, but their optimal use is limited to microscopes or flow cytometers equipped with a 405 nm laser and a 420 nm emission filter. Under these conditions, it is possible to perform effective 4-color imaging with good color separation, good photostability, and high sensitivity. The combination of DyLight 405, Alexa Fluor® 488, Rhodamine Red-X, and Alexa Fluor® 647 provides for maximum color separation. Another 4-color dye combination, which may be equally effective but has slightly less color separation, is DyLight 405, Alexa Fluor® 488, Cy3, and Alexa Fluor® 647. DyLight 405 conjugates are an excellent choice for blue-fluorescing secondary antibodies in multi-color labeling protocols.

This product is for IN VITRO RESEARCH USE ONLY. It is not a medical device and it is not intended for diagnostic or therapeutic purposes.

DyLight™ is a trademark of Thermo Fisher Scientific, Inc. and its subsidiaries.

go